DIY strain labels · print at home
Dispensary-grade strain art
in 30 seconds
Type the strain, pick a look, and get up to four finished label designs for mylar bags, resin jars and pre-roll tubes. Print tonight on the Avery sheets you already own.
No subscription · tokens never expire · PDFs sized to real Avery die-lines
In the photo · Candy Cloud, Gorilla Glue and Tangie Crush, all generated
The alternative
A Fiverr gig, or this
The going rate for one custom "exotic" bag design is a hundred-plus dollars and most of a week. Same aesthetic, same mascots, same drippy lettering. Minus the wait.
| Custom designer | StrainPack | |
|---|---|---|
| Price | $140.65 | $5 |
| Turnaround | 5 days | 30 seconds |
| Revisions | 1 included | Retry until it's right |
| Print-ready PDF | Extra | Included, sized to Avery |
How it works
Three steps. No design software. No designer.
- 01
Type the strain
Name, type, THC, weight and whatever else you want printed. A mascot is inferred from the name, or name your own.
- 02
Pick the look
84 art styles, eight palettes and every container shape. You get up to four finished designs per round, text already rendered in the art.
- 03
Print it tonight
Pick the Avery sheet you own. We lay the design out to the die-line, fill only the cells you want, and hand you a PDF with crop marks.
Styles
Made with this, not for this
Eight strains, eight of the 84 styles, five label shapes. Every one came out of the builder on the first try, unretouched.
Tropicana Cherry
Seed pack photo · 3.5 g bag face
Cereal Milk
Bodega snack · 2" square mylar
Chemdawg
Graffiti · 4" × 2" pre-roll wrap
Acapulco Gold
Luxury gold · 2" round jar lid
Skunk #1
Retro comic · 3" round
Sour Diesel
Y2K chrome · 4" × 2" pre-roll wrap
Strawberry Cough
Candy drip · 7 g bag face
9lb Hammer
Blackletter · 3" square mylar
Or skip the brief
Designs that are already finished
Made in the builder and kept. Pick one and it lands in your designs as a print-ready PDF on the sheet it was drawn for. From 5 tokens, and no brief to write.
See the actual output
Download one and check it
Real print files, not previews. Same exporter the app uses, built from the designs above. Open one, measure it, print it on the sheet you already have.
- Jar lids12 up on Letter · Avery 22807 · 2" roundPDF · 148 KB
- Pre-roll wraps10 up on Letter · Avery 94207 · 4" × 2"PDF · 103 KB
- Square mylar labels12 up on Letter · Avery 22806 · 2" × 2"PDF · 141 KB
- Bag front, printer file1 up with bleed and crop marks · 4" × 6" pouch facePDF · 121 KB
Checking alignment before you spend a real sheet? Print the calibration sheet — outlines and a one-inch ruler, so a wrong “fit to page” is obvious before it costs you anything. Free, and no account needed.
Sheets
Sized to the Avery sheet in your drawer
Every layout is measured to the die-line, with bleed. Fill the whole sheet or start at cell five because you already used the first four.
| Label | Avery | Per sheet | Best for |
|---|---|---|---|
| 2" round · jar lid | 22807 · 22877 · 22825 · 94501 | 12 | Resin and flower jars |
| 2.5" round · 4 oz / 8 oz jar lid | 22830 · 22856 · 22808 | 9 | Resin and flower jars |
| 1.5" round · pop-top | 94506 | 20 | Pop-tops, tube caps, symbol stickers |
| 1" round · symbol sticker or tube cap | 94066 | 63 | Pop-tops, tube caps, symbol stickers |
| 1" round · symbol sticker, print to the edge | 94500 | 48 | Pop-tops, tube caps, symbol stickers |
| 3" round · bag or jar | 94513 · 22891 · 5655 | 6 | Mylar bags |
| 2" × 2" square · mylar bag | 22806 · 22816 · 22846 · 22853 | 12 | Mylar bags |
| 2.5" × 2.5" square · mylar bag | 94104 | 9 | Mylar bags |
| 3" × 3" square · mylar bag | 94101 | 6 | Mylar bags |
| 4" × 2" rectangle · jar wrap or pre-roll | 94207 | 10 | Pre-roll tubes |
| 2.625" × 1" address label · pre-roll tube or info strip | 5160 · 8160 · 5960 · 8460 · 18660 | 30 | Pre-roll tubes |
| 3" × 2" rectangle · jar front | 94237 | 8 | Resin and flower jars |
| 3" × 2" rectangle · clear jar front | 22822 · 22934 | 8 | Resin and flower jars |
| 54 mm round · 3.5 g tin lid | none · cut by hand | 12 | 3.5 g tins |
| 200 × 20 mm wrap · 3.5 g tin side | none · cut by hand | 10 | 3.5 g tins |
| 4" × 6" bag front · 3.5 g mylar | 8165 · 5165 · 8255 | 2 | Mylar bags |
Sending artwork to a bag printer instead? There are 19 more layouts for that — the standard 1 g through 28 g pouch faces and the published Calyx Containers die-lines — exported with bleed and crop marks rather than laid out on a sheet. See every size and its measurements.
Wrong number? Most store-brand and OnlineLabels sheets share these grids. Print the free calibration sheet and hold it against yours.
Pricing
Tokens, not subscriptions
One token is one preview. Buy a pack when you need it. Nothing renews and nothing expires.
Single
$5
10 tokens
A ready-made design from the catalog.
Starter
$15
30 tokens
Five rounds of four previews and a couple of finals.
- Most popular
Grower
$29
80 tokens
A whole harvest's worth of jars.
Brand
$69
250 tokens
A full product line in one sitting.
FAQ
Before you print
Which label sheets does it print on?
35 Avery blank-label layouts across round, square and rectangle cuts, plus a full 4" × 6" bag front. Every layout ships with a free calibration sheet so you can confirm alignment on your printer before spending a real sheet.
Is the text really inside the art?
Yes. The strain name, type and THC are rendered by the image model as part of the design, the way a packaging designer would do it, not typed over the top afterwards. If a letter comes out wrong you regenerate, and retries are cheap.
What does a token buy?
One token is one image. A round of four designs costs four, and changing something about a design you already have costs one. Nothing renews and nothing expires.
Can I change a design without starting over?
Yes, for one token, and it keeps the composition you already picked. It swaps things well: color, lighting, background, adding or removing part of the artwork, and changing one word for another. It will not move things. Where everything sits was decided when the picture was drawn, so asking to shift a line lower or center it comes back unchanged. For layout, adjust the brief and generate a single design instead — the same one token, and the text lands where you asked because it is placed while the picture is being drawn rather than after.
Do my designs get saved?
Yes. Every round is kept under My designs, so closing the tab costs you nothing. You can download the print sheet again from any of them without generating anything, and delete the ones you are done with.
Can I use it for seed packs, or is it only flower?
Seed packs work. THC and weight are optional, and you can write your own lines of label text for anything the named fields do not cover: the cross, the generation, feminized or regular, a seed count. They print in the order you put them.
Will it print sharply?
On sheet labels, comfortably. A 2" jar lid lands around 500 dpi and a 1" sticker higher still, where 300 is the usual print standard. Large bag faces are the honest exception: a 4" × 6" pouch front comes out near 256 dpi and the biggest 6" × 9" face nearer 170, which is fine for a home print and light for a commercial press. Print the free calibration sheet and judge it on your own printer first.
Can I use these on products I sell?
The art is yours to print. If you sell in a legal state, pick your state in the builder and the official universal symbol and required statements are added along the bottom of every label at export, at or above the legal minimum size. It is optional, off by default for home use, and not a compliance service: rules change, so check the package before it ships.
Do you sell the sheets?
No. You buy Avery sheets wherever you already shop and print at home. If you want a print shop to run them, the PDF is set up for that too.
Ready?
Label your jars tonight
No subscription, and nothing expires. Type a strain, pick a look, and print it tonight on the sheets you already own.
Make a label