Avery sheet
4" × 6" bag front · 3.5 g mylar
4" × 6" cannabis label die-line, measured to the trim with 0.125" bleed. 2 per Letter sheet, fits Avery 8165, 5165, 8255.
Measurements
| Trim size | 4" × 6" |
|---|---|
| Shape | Rectangle |
| Bleed | 0.125" beyond the trim on every edge |
| Goes on | mylar bags and pouches |
| Per Letter sheet | 2 — 2 across by 1 down |
| First label at | 0.25" from the left, 2.5" from the top |
| Label pitch | 4" across, 6" down |
| Avery blanks | 8165 · 5165 · 8255 |
| Measured from | full-sheet label, our own imposition: two 4×6 fronts side by side, cut by hand |
Full-sheet label. Crop marks are printed; the user cuts.
Designing for this label
Artwork is drawn at this shape rather than resized into it. A rectangle is not a square design cropped, and a bag face is not a jar label scaled up: the composition has to be built for the proportion it will be printed at, or the name ends up cut in half at the trim.
The export places the artwork inside this die-line with the bleed above already allowed for, so the PDF is ready for an ordinary inkjet or laser printer with nothing to line up by hand.
Printing it
The export lays 2 labels out on a Letter page at the exact pitch above, so a sheet of blanks feeds straight through an ordinary inkjet or laser printer. Print at 100% with page scaling off — "fit to page" shrinks the artwork by a few percent and every label on the sheet drifts off its die-line. Print the free calibration sheet on plain paper first and hold it against a sheet of blanks to check your printer's own margins before committing a real sheet.
Download the calibration sheet for this layout — free, no account, one sheet of plain paper.
Ready-made designs for this label
Or describe your own and the builder will draw it at this shape.