StrainPack
← All sheets and die-lines

Avery sheet

12 oz longneck bottle wrap · 7.375" × 3.125"

12 oz bottle cannabis label die-line, measured to the trim with 0.0625" bleed. 3 per Letter sheet of full-sheet stock, cut by hand.

Measurements

Trim size7.375" × 3.125"
ShapeRectangle
Bleed0.0625" beyond the trim on every edge
Goes onbottles — drinks, shots and tinctures
Per Letter sheet3 — 1 across by 3 down
First label at0.563" from the left, 0.689" from the top
Label pitch7.499" across, 3.249" down
Measured fromOnlineLabels OL2921 full wrap (7.375 × 3.125); Cary Company longneck body 2.4" diameter, 4" straight

Full-sheet label, cut by hand or on a cutter. Wraps the straight body of a 12 oz longneck with a small gap at the seam.

Designing for this label

Artwork is drawn at this shape rather than resized into it. A rectangle is not a square design cropped, and a bag face is not a jar label scaled up: the composition has to be built for the proportion it will be printed at, or the name ends up cut in half at the trim.

12 oz longneck bottle wrap wraps all the way round and shows the buyer only the middle third of its width, so these layouts are the ones that hold on it:

The export places the artwork inside this die-line with the bleed above already allowed for, so the PDF is ready for an ordinary inkjet or laser printer with nothing to line up by hand.

Printing it

The export lays 3 labels out on a Letter page at the exact pitch above, so a sheet of blanks feeds straight through an ordinary inkjet or laser printer. Print at 100% with page scaling off — "fit to page" shrinks the artwork by a few percent and every label on the sheet drifts off its die-line. Print the free calibration sheet on plain paper first and hold it against a sheet of blanks to check your printer's own margins before committing a real sheet.

Download the calibration sheet for this layout — free, no account, one sheet of plain paper.

Make one for this shape

Nothing in the catalog is drawn for this one yet. Describe what you want and the builder will draw it at this shape, then lay it out on the sheet as a print-ready PDF.

Other sizes