Printer file
12 oz sleek can wrap · 7" × 5" · printer file
12 oz sleek can cannabis label die-line, measured to the trim with 0.125" bleed. Sized for a can face and supplied as a print-ready PDF with bleed and crop ma
Measurements
| Trim size | 7" × 5" |
|---|---|
| Shape | Rectangle |
| Bleed | 0.125" beyond the trim on every edge |
| Goes on | beverage cans |
| Output | One face per page, with crop marks at the trim |
| Measured from | Crown 12 oz Sleek, 204.5 diameter (58 mm); labels from Your Brand Cafe (7 × 5.31 with a 1/8" gap), Grandstand (7.2 × 5) and Levapack (7.0 × 4.5) |
The tall, narrow 12 oz can seltzers come in (Crown Sleek, 58 mm). Not the 250 ml slim can, which is narrower. Confirm with your label printer before ordering a roll.
Designing for this face
Artwork is drawn at this shape rather than resized into it. A rectangle is not a square design cropped, and a bag face is not a jar label scaled up: the composition has to be built for the proportion it will be printed at, or the name ends up cut in half at the trim.
12 oz sleek can wrap wraps all the way round and shows the buyer only the middle third of its width, so these layouts are the ones that hold on it:
- Three panel wrap
- Stacked tower
- Mascot emblem
- Crest
- Minimal mark
The export places the artwork inside this die-line with the bleed above already allowed for, so the PDF is ready for a pouch printer with nothing to line up by hand.
Printing it
The export is one 7" × 5" face per page with the 0.125" bleed carried past the trim and crop marks at the cut line. That is what a pouch printer expects: they trim through the bleed, so art that stops exactly at the trim shows a white sliver wherever the cut drifts. Send the PDF as it comes out rather than resizing it, because resizing is what moves the crop marks off the trim.
Make one for this shape
Nothing in the catalog is drawn for this one yet. Describe what you want and the builder will draw it at this shape, then lay it out on the sheet as a print-ready PDF.